The systems originated in Europe in the early 1970's. They were originally used as temporary bridges for the military as well as floating docks.
In USA, over 12,000 floats were used at the 1984 Olympics in Los Angeles. These floats are still in use today. HP&C created and patented the jagged shape to provide the best, safest, modular floating drive-on dry dock available today.

Modular Docking Systems modular design and superior quality hold up quite well in a cyclone depending on the installation. While no dock is cyclone proof - the Modular Docking Systems have survived quite well. Our customers are reporting excellent results for the docks that were hit hard in all the cyclone/hurricanes/typhoons. The biggest issue is that the docks are securely attached to solid pilings and given plenty of line to be able to absorb the wave energy. In each case, no damage was sustained to the dock and the docks did not fail - just the mounting points on the pilings it was attached to.

Absolutely, in the areas where there is not a local dealer presence, we can ship your Modular Docking System directly to you or a local freight terminal for pickup.

Yes, actually, most of our customers install their own docks. Your dock will arrive partially assembled or separate cubes and parts and 2 people can easily do the final assembly and have it in the water in immediately.

The Modular Docking System is shipped via common carrier or shipping container to either a freight terminal or direct to the place you want to install. The core components will be assembled in easy to fit together sections for you to finish.

Most of the Modular Docking System products come complete with a tool kit. This kit comes with a T-handle wrench to screw the connecting pins and a wrench for the most common accessories and external connectors. If you are purchasing individual dock sections, tools are available for purchase individually.

The High Molecular weight polyethylene is softer than the gel coat and fiberglass of your boat. The Dock will affect your hull about the same as using a trailer or other bunk style boat lift. Keeping your dock clean and hosed off will minimize the chance of sand and grit on the dock scratching your boat.

The Modular Docking System is built to withstand harsh environments. Our cubes will dissipate energy every 19 inches and roll with the waves. For heavy waves, it is necessary that your craft be tied down securely and that you frequently check the dock to ensure that all connections are tight and secure.

Barnacles give some effect on the Modular Docking system. They will grow about ½ to 1 inch and then slough off and start again. Marine growth will occur on the underside and other parts of the dock that is constantly submerged in water. However, this will not impact the overall buoyancy of the dock in any way, shape or form. Remember that one of the reasons you buy the Modular Docking System is that it is virtually maintenance free. Therefore, cleaning the dock's underside is simply an extra chore that you do not have to worry about.

The LegoDock systems are virtually maintenance free. You will want to hose it off and keep the dirt and grit off. In rough water, you will need to check the connecting pins and attachment points about twice a year to make sure everything is tight.

No, with the Modular Docking System's U-channel systems, your boat is completely out of the water and dry. If you have bottom paint already, the dock will eventually wear on the bottom paint where the hull is in contact with the dock.

No. The cube itself is made up of materials softer than the hull on your boat. This can be accomplished by simply hosing down the dock when you are done using the craft for the day. Should you allow debris to accumulate on the surface of the dock, those elements will form an abrasive, which could potentially scratch or mark your hull. This is also true for your boat trailer, rack storage surfaces and bunks on a boatlift. Boat hulls of normal integrity will not incur damage by interacting with the cube surface.

No, For outboard and inboard/outboard boats, the propeller is facing aft and cannot impact the dock. For inboard engines, the dock is configured with a wider opening in the stern of the dock directly in the center and remains open approximately a third of the way up towards the bow of the dock.

Any color of LegoDock system is available on request. For the outdoor durability, technically speaking, although the carbon pigment in the polymer givees the highest level of durability, strength, HP&C¡¯s synthetic compound provides almost the same durability and strength in any other color.

Each of the main-cubes will hold over 90kg/200 lbs. 9 cubes can hold ONE TON! The half-cube can hold right at 45kg/100 lbs. So our dock definitely has enough buoyancy for your boat. The cube is air filled (basically a rigid, hollow compartment) with a wall thickness of approximately 6mm.

It depends on the area. In most cases your Modular Docking system is considered a temporary structure and may not require a permit. It really depends on your local regulations.

Yes. Many customers have registered their Modular Docking system as both motorized and non-motorized boats and barges. This sometimes simplifies local requirements.

The Modular Docking system can be configured to dampen waves. In a typical Drive-on configuration, the docks will not affect the wave action.

Our normal cubes are extra heavy duty already.

We have many customers who use their Modular Docking systems in a marina to protect their boats and keep them clean. Many marinas prefer this system to a lift for aesthetics also.

Modular Docking systems rolls with waves/water as Mother Nature imparts her wrath on the dock. Water surges can be handled with our tide manager system. The Modular Dockgin System is ideally suited where normal dock or dry-docking procedures are difficult or unsafe. Where water currents might cause the watercraft to bump up against the seawall or existing dock or mechanical lift, the system allows a safe, protected approach, contact and dry-docking procedure.

By using a row of the half-cube with the flat side up it will form a bridge for the water to pass under the dock. This allows debris to not get caught up alongside the dock.

Yes. In fact, with a few rows of the half-cubes, flat side up to form a series of steps or a gentle ramp to your main dock. The floats are fine sitting on dry ground.

The Modular Docking system is engineered to be extremely durable and flexible to allow it to handle harsh wave action in most storms. Made of UV-stable composite, The sun will not destroy or alter the cube in any way, shape or form.

Absolutely. The dock can be left in all year even in salt water The Modular Docking System is designed to be left in the ice for the winter. The special design of the cube allows the dock to pop up on top of the ice.

The issue when it comes to ice and its affect on the system is water flow. If there is a heavy current or moving ice, the key question to ask yourself is, "When the ice thaws out, does it just dissipate back into the water level or are there large blocks of heavy flow ice moving around that would severely damage stationary docks?" If you answer "yes" to the first part of the question, you can leave our dock in all year. If you answer "yes" to the second part of the question, then your next move is as obvious as the ice will tear out and wash away any structure.

Yes, you can use the dock anywhere you can drive your crafts. The cubes only draw about 50 to 100mm of water with the craft off it. The minimum functional water depth is measured at the back of the dock where the drive-on takes place. The dock needs to be able to flex in order to drive on top of it. System is fine at rest on the bottom during low tides. The important thing is that there is enough depth at the stern of the dock to allow the boat to back off.

The dock can easily be moved to another location, either by towing it with your PWC or boat, loading it up on your boat trailer, or by disassembling it and having it moved to its new location . The dock can easily be moved to another location, either by towing it with your PWC or boat, loading it up on your boat trailer, or by disassembling it and having it moved to its new location.

The cubes can be used as a floating platform, gangway, finger pier or any other type of customized configuration you so desire. A stable, walking platform must be at least three cubes wide or 5'. The dock is extremely stable to walk on and will support your body weight due to the balanced buoyancy of each cube (which is about 200 lbs.).

The non-skid surface makes the dock very safe to walk on even when it is wet.

The innovation that's better than ever. Modular Docking Systems patented unique design provides the only modular, changeable, the most durable, expandable dock system with built in flex self-balancing motion.